The main | Parts | Heat | Chart of nomograms | Reference information |
The amount of heat transmitted a construction of certain mass, pays off under the formula:
Q = m · Cp· dT, [1]
where
Cp – a specific heat capacity of a material of a construction, cal/(kg·oC) [J/(kg·oC)];
m – construction mass, kg;
dT – change of temperature of a construction, oC [K].
For recalculation between force systems it is used the following dependence: 1 cal/(g·oC) = 4,1868 J/(kg·oC).
Let's converse the formula (1) to a view:
dT = Q / (Cp · m), [2]
The circuit design of nomographs is presented in drawing 1.
Drawing 1. The circuit design of system of nomographs
After applet start an auxiliary window will have the following appearance (drawing 2).
Drawing 2. An additional window of an applet on build-up of system of nomographs
In an auxiliary window the circuit design of disposing of nomographs is already shown, but she demands recurring feeding into, therefore on each small square which is marking out a nomograph "is clicked" by the right key of the mouse and the left key "clicked"on that place where there should be a colour flag indicator (a place of disposing of meaning of parametre Z of a nomograph). It is possible choose any other location of variable parametre Z. After recurring appointment of the circuit design of nomographs "is clicked" by the left key of the mouse on sign "[-]", had in left overhead to the angle of the circuit design of nomographs. It will change the aspect on "[+]". It means, that the circuit design of nomographs is fixed. .
Drawing 3. An additional window of an applet on build-up of system of nomographs with the tuned circuit design of nomographs
After attaching of the circuit design of nomographs, "is in succession clicked" on everyone sign, marking out a nomograph, and it is pushed three buttons "In the working memory" ("Â ÎÇÓ"), "Substitution ID" ("Ïîäñòàíîâêà ÈÄ"), "the Total formula" ("Èòîãîâàÿ ôîðìóëà") for entering of all parametres of a nomograph into an on-line storage and design formula formation.
We transfer to the basic window and we induct meanings of steps on axes "X" and "Y". We push the button "to Build on ID" ("Ïîñòðîèòü ïî ÈÄ").
Drawing 4. The basic window of an applet for build-up of system of nomographs.
More detailed instruction on operation with an applet.
The topic of this section is the calculation of heating or cooling of a homogeneous structure.
graphic-analytical systems
Copyright © 2005-2022 All rights reserved